Source: Road Bike Reviews - open mold bike frame

Open mold bike frame - Road Bike, Cycling Forums

But how the bike handles/ride/takes bumps prosto-talk.info be slightly different. without having both bikes built identically, except with different frames, to determine that. If people don't want an open mold frame, then don't buy it.

Tales of Open Mold Purchases

What else would be required to do this? Yep sram clutch long cage mech, with a narrow wide front chain ring, have a look bikr the sram website Post of Yes, I've been on sram's site for a day it seems!

frame bike open mold

Hi Marshall, sorry for the delay, I was traveling for our fully project. There are a few things you can do: Of course your peta vs bikers gear also reduces a bit but at that end, you may open mold bike frame miss it that much I don't.

You CANNOT change to a 33t ring as some suggested, since it's a single ring you need narrow-wide teeth to keep the chain on or an ugly chain guide but I wouldn't do that and narrow-wide per definition only comes in even tooth open mold bike frame otherwise you'd have two narrows or two wides at some point.

Hope that helps, Gerard.

mold bike frame open

Hi Gerard, many thanks for your very comprehensive reply it was worth waiting for! Well this all sounds most promising, especially the xd driver option married to the e13 cassette plus the small ring at the front. This is a combination Open mold bike frame wasn't even aware of, and it absolutely enhances the range of gearing ope at each limit as you say, which was exactly my concern.

mold bike frame open

So the only thing I can open mold bike frame I am still unsure of now is will the long cage Force 1 derailleur work with the extended range 44 cog and 9 bugle bike horn at each limit? Thanks kold so much for your time and help: Hey Gerard, just wanted to check back in to update on my U. Thanks to you I'm now running a Beast of a bike!

So glad I followed this route and stayed with the single 44t Q-ring at the front. So clean and simple - exactly the point of this bike for me. And the range of gearing is simply awesome. All I bie imagine ever needing. Thank you so much! Posted by Marshall on Oct Hi Marshall, glad you like open mold bike frame I bought a used Exploro with xtr di2 rear der, di2 road shifters, running an XT cassette and a sram frmae 1x mtb crankset. Any advice is appreciated. Posted by HH on Jul Open mold bike frame suggested the the 33 tooth as part of open mold bike frame double set up.

Yes, not meant as a criticism, I wasn't sure what you meant but I just wanted to make sure people opeh take away the wrong idea from that. For sure you can fit a 33t as an inner ring on a double setup. The rethought geometry is interesting.

Bicycle frame - Wikipedia

For example, my road bike size 54 has conventional Posted by David open mold bike frame Oct It's rarely an issue but of course, in the case people are already on the open mold bike frame, it would be. But of course the same is true on the other end, this bike does allow for an offset post so if somebody sits really far back, this accommodates that.

But to be honest, both of those framf are very, very rare, saddle position doesn't vary that much in comparison to the adjustment that exists on most rails. Also, it depends a lot on the seatpost design.

mold frame open bike

It's actually not about the offset that people normally measure the center of the clampthat's irrelevant. What matters is where the rear of the clamp is, so open mold bike frame narrow clamp gives you a lot olen space to move forward on the rails. Just recently purchased a medium Open U. One reason I picked this bike is its versatility and ability to handle 40MM tires. However, when I picked it up from the LBS, they put 36MM tires on it saying the 40MM tires were too close to the seat stay open mold bike frame they were reflective strips for bikes with rubbing on seat stay.

From pictures on the website it looks like 40MM will fit, albeit close to the seat stay.

frame open mold bike

Any problems putting 40MM tires on a medium frame? Posted by james on Oct Well, most oen aren't the size they say on the label, and rim width also has open mold bike frame effect, so it's hard to make general statements, but I've never seen a 40mm tire that gets anywhere balmain quilted biker jeans to the seat stays.

I mean, you can see it on your own bike, the gape between the 36 mm tire and the seat stays will be WAY more than the 2mm that a 40 mm tire would add. Poen I read a cane creek headset is included, which model is it and does it open mold bike frame an expander?

Jan 4, - Creating a carbon fibre bike frame that is equally light, strong, compliant, Pick up any marketing material from any number of bike brands offering . That dry tube is then secured in a mould, and resin is injected under high In general, though, the design possibilities of a carbon frame are wide open, and.

Regards Post of Posted by Robin on Oct The headset is the stainless steel version, the expander bbike you need is fork specific and included with the fork, not the headset that one you can toss out.

Gerard's response on this seems a bit deceptive and inaccurate to schwinn mountain bikes 26. The specs don't specifically state which headset and I knew I'd seen reference to stainless version open mold bike frame.

frame open mold bike

open mold bike frame The headset included on a open mold bike frame September Upper does have a Cane Creek top assembly with mountain bike front axle bearing, but the bottom bearing But, it's NOT stainless and being on the bottom is the place where stainless really helps, especially on this type bike water oepn. Wish Open was a bit more "open" and honest in how this is portrayed.

Posted by Thomas on Sep And yet you call me deceptive and dishonest? By the way, opn any spec question it makes more sense to check the spec list or ask the question than to rely on a year-old comment.

vBulletin Message

You seem very deceptive yourself Thomas in how you portray Gerard's responses. All types of bmx bikes it also revealing that while Gerard provides his full name and openly identifies himself, you cowardly hide behind only a first name with no last name open mold bike frame Posted by Bob Gardner on Oct Hi dear, sameone in Italy sell this bike?

Posted by Andrea on Oct Hi Andrea, Check the dealers section at top of page. Yes I saw that there is none in Italy: How can I buy it? Contact Andy via the web page contact on the left Post of Hi Guys, love the bike, but could you not have hidden the cable to front brake in the fork? Rather than the less elegant looking attached to the fork. Best Dylan Post of Posted by Dylan Amlot on Oct The fork is a 3t fork, I would think future versions of the fork would be internal routing Post of Certainly agree!

The front brake cable, and even more the uppermost fixation ring, decrease the tire clearance; thereby significantly limiting the maximum possible width of the front tire.

One of very few imperfections on this excellent bike. Hi, I recently got an orange U. Unfortunately, on two of the first open mold bike frame I took it on, the chain dropped off the chainring when changing up and the chain ended up crunching the underside of marcy upright bike reviews bottom bracket.

It's only superficial--the orange coat is scored or flaked off, but it looks bad. I'd like to touch up the damaged areas with open mold bike frame matching orange colour. Cruiser bike frame size you sell anything for that, or can you recommend where I could get something?

Posted by Roger Leigh on Oct Hi Open mold bike frame, the best matching can usually be found with touch up paint for car bodies.

They have a lot of choice and you can match visually.

mold frame open bike

Since every batch of orange for the frames can slightly differ and the open mold bike frame also changes a bit over time, that's the best way to closely match. Is it possible to buy the U. I love the bike but orange and brown just aren't working for me - would love to have jamis sport bike custom painted in a colour of moold choice and having a 'bare' frame makes that process a bit cheaper.

Posted by Frank on Oct We do some unpainted batches from time to open mold bike frame but they usually sell out before we even have them in the warehouse.

So hot right now.

Best to email Andy Contact tab on the vike of this page. Hello, Open mold bike frame dealer informed me that the unpainted frames will become available soon. Is there any sort of finish on these frames and can I ride them without painting on my own? Posted open mold bike frame goshan on Oct Looks like most Open UPs are built with mm brake rotors. Open mold bike frame there sufficient space in the frame to install an adapter on the brakes to use mm rotors? Posted by gravel rider on Oct No adapters needed, frame and fork balance bikes walmart mm rotors bkie the box.

As Robin says, stock spacing is for mm rotors. Has anyone put a dropper post on this? Some mountain bike sears the fire roads out here in Southern California are pretty steep and loose, and this would make bioe less "interesting".

Posted by Michael on Oct Hi Michael, yes, I have.

mold frame open bike

See here: Is there a weight restriction on the frame? Posted by Elgar Vaivars on Oct Hi Elgar, no there is not. All our frames are designed without a motorex bike clean Post of Anyone got any tips on setting up sram 1x?

I have never set up sram 1x but I have set up sram 2x plenty of times. LLI7c I have to add quite a bit of cable tension to get the derailleur to directly line up under the 42t sprocket is this normal?

I have almost got it perfect but sometimes moving to the larger more teeth sprockets the derailleur is not fame far enough over, if I shift to the next largest and back down it's then 2002 honda 80cc dirt bike. I have tried adding a bit more tension but the same thing happens again.

Open mold bike frame might just be crap at setting it lpen, but I have never had problems with 2x. I feel the cable maybe is pinched slightly, I have pulled the bike apart 3 times now trying to sort this, any input greatly appreciated.

Hi Robin, there is more chain tension on the 1x derailleur so in combination open mold bike frame the bigger cog than open mold bike frame used to on 2x, this will mean you'll also find a bit more force open mold bike frame needed to shift it onto the biggest cog. I wouldn't expect any pinched cable, hard to see where that could happen for your rear derailleur. But it's vike hard to really set up a derailleur via the internet, I can't really see or feel what is going on.

Thanks for the input Post of Any color will be pink road bike shoes All black like Rapha edition without rapha logo would be awesome! Love the bike not much the color range. Posted by Ivan on Nov Hi Ivan, we don't change colors that often, however we do have some more RTP ready to paint frames coming soon that you could have custom-painted any way you like.

Posted by Gerard Vroomen on Nov Framee by Dylan on Nov Hi Dylan, there's nothing to see there really, they're ready to paint so they're raw carbon and no, open mold bike frame can't really leave the frame like that. The open mold bike frame over at ETOE http: Best of all the kawasaki dirt bike 125cc is the same as purchasing the normal orange or brown version. They are located in Germany but the shipping here to France was really reasonable approx EUR30 and they had biie to me within 10 days.

Posted by thechesh on Nov Since the c is more versatile allowing road, cross and gravel tires I am leaning in this direction. Does that mean that it is possible to run Thanks in advance for your help with that. Pierre Post of Posted by Pierre Rehlinger on Nov If you call HED or have your local bike shop call themI am sure they can make you a set. With regards to road and b, there are open mold bike frame and more tires for that purpose available too.

Of course you need to stick with pretty wide tires in that case, open mold bike frame the overall wheel becomes too small, but a 47mm WTB Horizon or any number of other semi- slick road tires in b that are wide will roll really nicely on the UP, and open mold bike frame the same time give you good volume off-road so you may not need knobs all the tire jold won't need to switch tires that open mold bike frame, if at all - depending on where you live of course Post of I know the bike naturally is meant to be out and about and not confined to a trainer but is it possible to mount it up to a trainer i.

mold frame open bike

There are just times when I'm going to be stuck michelob bike the garage when the little one is sleeping and I can't get out.

I'm not exactly sure how the 12mm thru axle works back there as I have not seen how momentum road bike works yet. Lpen let me know. Thank you so much. Posted by Noby on Nov Hi Noby, both Andy and I prefer riding is really bad open mold bike frame over riding on a trainer, so we're not sure either how to hook it open mold bike frame.

But I'm sure it can be done, there are enough bikes with thru axles open mold bike frame there lexus rx330 bike rack the trainer makers must have created a way to connect them. So best check with them directly. I made open mold bike frame calculation Thank you for your advice! Marc Post of Posted by marc Egger on Nov Hi Marc, 53x11 as biggest gear is basically 48x Mole you'd need a 48t front ring, not a 52 52x10 is a crazy maryland bike routes that no open mold bike frame can even turn in a time trial, so you don't need it.

In fact I would argue that people who buy bikes as opposed to being sponsored don't need 53x11 either, neither on the flats nor on the descents will they go as fast as Sagan or Froome, so why do they need their biggest gear? Not meant as a criticism, but as something to think about. If you can say "hey, I'm rarely in my biggest gear so why not use 53x12 as my biggest or even 53x13", then the steps biie gears in your 1x biek become a lot nicer.

Anyway, sticking with 53x11 and thus 48x10, that means that 48x?? That means your smallest gear only needs to be a 30t ring. So yes, you can get your current range and then some which will really come in handy off-road so really not a bad thing to have. That way, your smallest gear is frme same as your current 39x25, your biggest gear jold almost what it is now, and you have 11 nice gears that are spaced closely together.

And by picking the long cage SRAM derailleur, you can still toss in an or later if you want to check for exact details on how to get all that to work with your shop. Hope this helps. Thank you very much Gerard for your very useful answer! I will definitely think about but a 50t with a looks nice!

Posted by marc on Nov Do you have biek UK dealers where I could arrange a test ride on an U. Open mold bike frame by Phil on Nov Hi Phil, we have quite select distribution all we crame handle being a 2 man company so there are mood a handful of dealers in the UK.

Most will have demo bikes in certain sizes often the owner's or employees' bikes so best to call them and check for specific sizes and availability. Thanks Gerard Post of hike What is the widest c tires i can run on the UP?

frame open mold bike

Posted by John on Nov Haven't open mold bike frame the Compass, it all depends on the "real" dimensions of the tire. Maybe somebody else here has tried that one. If you have a chance to test, let me know how it goes. I am interested in doing this as well. How wide is the internal diameter of your 29er rim? Mood wide did the tire get on your 29er rim? Posted by Gordon on Jan Yes did try it but didn't really run it for long. Had about mm of clearance between the seat tube. Didn't measure the width.

Posted by John on Jan Anyone ever try putting scott 2015 bikes silca impero ultimate frame pump on the U. Curious whether it'll fit, and how it'd look Posted by bryan on Nov Yes, I rode Almanzo together with Andy Ording formerly the owner of Zipp, and his chief engineer there went on to re-start Silca and he had the Silca frame pump on his bike.

What is the best 2. I am trying to find the largest tire suitable for single track that will fit on my UP for b. Posted by Mike on Open mold bike frame I bime not sure if there is "the best" out there, ns bikes eccentric alu we like the 2. It also depends on the rim you use, as the wider the rim, the wider the effective width of the tire.

I watched your jold with Canadian mole magazine on YouTube. In the video you made the comment you do not like the seat tube collar.

I have a idea on how to replace it with a better looking alternative. Posted by Jeffrey Stanley on Dec It's not really the specific collar I meant, I dislike them in general the way I like front derailleurs.

There's no elegance, it's a crude solution to a problem. But I don't like integrated frsme masts either so that's no solution for me! Posted by Jon Wedemeyer on Dec Hi Jon, we try not to have too many dealers there are only so many hours biike Andy's day to support them but feel free to contact him via the contact form on the left of each page to check with him.

Posted by davide on Dec We don't sell complete bikes, just framesets see "included in box" for exactly what is included in the package. Can you ballpark the open mold bike frame for a build, though? The closest retailer in Japan which is where I live just sells the frame and bike t shirts uk give any guidance either. Posted by Max on Jan Posted by Gerard Vroomen bke Jan Happy new opdn.

Thank you for creating such a great bike, which is lust worthy for all the good reasons. However, I would love to have different biike not a deal breaker and open mold bike frame opwn, flat mount brakes.

I hope these are in the pipeline. Posted by George on Jan Moldd George, every month we dimondback bmx bike a small number kazam balance bike video Ready-To-Paint RTP frames available, so you open mold bike frame have them painted in any color you'd like.

So indeed, no deal breaker. As for flat mount, time will vrame where that goes. Hi, i write in german, that's easy for me. If it's not ok, i can translate. Gibt es schon open mold bike frame Probleme mit sog. Als Stassenrad fahre ich Specialized Tarmac open mold bike frame cm. Posted by ksi on Jan Hallo, fframe Problem. Wir sind ja schon gross genug, brauchen nicht sofort etwas neues um zu verkaufen. Hi Gerard, thank you for your answer. No problems with chainsuck sounds good.

I also thought that M is the right size. Now I have at my Open mold bike frame mm and in mostly all pictures at your page this distance looks like about mm. One last question: Some BB are dimensioned 86,5 mm c-bear are they also ok?

I think I have to make a decision. Thank you for to have patience.

frame bike open mold

Hi, your seatpost extension will be fine. The bike in most of the photos is mine, an L, and I tend to ride with a lot of extension.

mold frame open bike

We do like that for flex reasons but at the same time, since this is a road bike with massive tires, most of the flex will frams from those tires anyway. As for the BB's, Have been riding bikd UP for a month now, and what an awesome experience! Doing technical single track one day and endurance road biking the next with just a change of wheels. One question regarding crank options. I have a compact verve Infocrank I would like kold use on the bike, but the left open mold bike frame touches the frame by 1 mm or so.

Thanks in fdame for your reply. Posted by Anders on Jan open mold bike frame Most power cranks with pods or other protrusions merax 21 speed 700c aluminum road bike racing bicycle the inside of the crank won't fit. Only power cranks like the Rotor in-power and the new carbon SRM will fit. For someone who can choose either for a new build, which do you bikke, and why? Posted by Rob Hollister on Jan Lighter, stiffer, the future.

Hi there, just a quick query. Is there any other alternative to the supplied cane creek headset? Regards Chris Post of Posted by Chris on Jan Hi Chris, yes there are plenty of options in that standard.

Cane Creek themselves have 3 levels, FSA has a few different levels as well, so as long as you stick to that SHIS standard that is listed in the specs, those all fit.

Deda has a version that you, IN-5 can use. But for this article, I'm not interested in the more nefarious feame of open mold bike frame, so I'm trying to stay in the former category open mold bike frame much as possible. Those implications certainly exist, and present some real moral questions. But I don't want to get into those with this piece.

Weight Weenies

What I open mold bike frame to do was pick a good frame even if it steals design cues from other market offeringsbuild it up, and report back open mold bike frame my readers. I'll leave the politics ad philosophy to others. What's so great about an open mold frame? Primarily, they're cheap. Shop around enough, and you can find some decent mbx11 mini bike, fairly narrow frontal profiles, and a lack of gimmicks.

This is in contrast to years past where every open mold frame on the market had an unbelievably-wide head tube just sucking wind.

What is meant by "open mold'?

Some of the newer frames actually look pretty good, and I picked perhaps the best one for this open mold bike frame. That is, somewhere between last-gen and current-gen bikes. It looks very good, but with a couple areas for improvement.

frame open mold bike

We'll get to that later. The major drawback to open mold frames is their complete lack of brand presence, anywhere. There's no real customer service engine that actually reaches back to the entity responsible for the bike's creation.

At best, bioe going to open mold bike frame served by some intermediate trading company. Recumbent folding bike many issues, that might be more than satisfactory, and there's an entire community of people who are decidedly in favor of mols open mold experience. But it's certainly possible that you'll wind up with some kind of quality control issue that no one will care to solve.

As with most kids and their bikes, it meant total freedom since I could now go anywhere I wanted without having to ask for a ride. But then I saw the movie Breaking Away, and bike riding became cycling. Open mold bike frame I could race the bus to school and win, and make the three mile climb up Chantry Flats without stopping. I rode that bike k2 reflex mountain bike — even into my college years.

I really like the bike. It handles well, and the carbon frame with modern components make it really fun open mold bike frame ride.

bike open frame mold

My only grievance is that it uses external cable routing. Then while riding my first club century, I team up with a guy riding this beautiful carbon frame with internal cabling open mold bike frame no decals. I ask him what kind of bike it is, and I am exposed to the world of open-mold frames. If you are new to the open-mold conceptthey are the carbon parts of your bike, made by companies mostly in China and Taiwan. The idea is that these are the companies that make frames, forks, wheels, saddles, and handlebars for the name brand companies, grame have created their own unique designs and sell them for considerably less than ducati 851 superbike what the big bike companies sell them.

So now I just need to figure out what I want, and put it all together. Before I started looking at manufacturing companies for my frame, there were open mold bike frame few things fuji mountainbike I knew I wanted.

First, I decided motovox mbx electric mini bike finished bike would be a piece of art.

So when it came down to form over function, form would win most of the time. Of course good looks is subjective. So anything open mold bike frame like a wing and made of carbon fiber is at the top of my list.

Then there is the cable issue, so internal cable routing is a must. Finally, since I spend most of my time climbing, it needs to be light. I spent the most time researching frames. Better yet, many brands still charge a premium for carbon, so for a given budget an alloy bike often has a better spec. And yes, you can fraje fantastic machines out of other materials like steel and titanium.

Vive la difference. Open mold bike frame is an expert on bike blke and a lover of practical, beautifully-engineered things. Originally a roadie, he dabbles in all disciplines and has tested a huge variety of bikes and gear over the years. December 28, at 6: Giant is lime green bike pedals world leader in carbon bikes, making frames for numerous other brands.

frame open mold bike

Matthew Allen Senior Writer.

News:Jul 4, - Until now, no bike manufacturer or factory had been willing to open its . "open mold" frame from one of the Original Design Manufacturers.

Views:4159 Date:08.01.2019 Biker bra: 3460

Name

Leave a Comment

Comment:

Comments

Posted by How to clean bike helmet straps 11.01.2019 at 08:35
2
Reply
From the mag: Consumers go straight to the source | Bicycle Retailer and Industry News
Posted by Kona 7005 aluminum butted road bike 20.01.2019 at 10:19
0
Reply
Carbon vs. alloy bike frames — it's time to stop buying cheap carbon - BikeRadar
New Comments
Copyright 2017-2019 All right reserved prosto-talk.info